Where what the camera saw and what was said differ,
you choose which one is right.
Capture the work.
Skip the paperwork.
Multimodal AI that captures and protocols laboratory work as it happens.
Example · Vinegar titration
- 00:48Dilute the vinegar 1:10
- 03:15Pipette 25.00 mL into a conical flask
- 05:41Fill the burette with 0.1 M NaOH
- 09:26Titrate to a faint pink: 20.80 mL
Protocol ready to sign
Hours lost every day
31.2% of total operational lab time goes into manual documentation and digitization.
- Inaccurate, error prone capture
- Written from memory
- Lack of traceability
- Non-standardized
14.4% Manual documentation at the bench
16.8% Re-typing into spreadsheets
One dot is 0.1% of operational lab time
Capture at the source
NewSol listens and watches as the work happens, documenting the protocol in real time.
Voice
Spoken steps become a structured record, completely hands-free.
+ Vision
The camera recognises devices, reagents, labware and workflow steps.
+ AI
Fuses both modalities into a complete, ready-to-sign document.
Complete, GLP-ready documentation
How it works
From work steps to signed protocol
-
Capture
A clip-on camera captures audio and video.
-
Understand
Speech recognition, object detection and a lab-domain context.
-
Summarize
The output is summarized for each step and experiment.
-
Confirm & export
You review, sign, and push it into your ELN in one click.
Security
Built for regulated labs. Your data stays where you decide.
- Privacy-first
- Event-triggered capture only. No always-on surveillance, GDPR by design.
- Flexible deployment
- Cloud, on-premise or fully on the edge. The customer decides where data lives.
- EU AI Act ready
- Designed with the EU AI Act in mind. With on-premise or edge deployment, recordings never leave your lab.
- Built for compliance
- GLP / GMP-ready structures, a full audit trail and role-based access.
- Integrations
- Exports into ELN and LIMS systems, plus an open API for in-house tooling.
Talk with your data
The protocols are kept as context so you can talk with your experiment, ask questions and get tips.
I want to find the acetic acid concentration of a vinegar sample by titrating it with 0.1 M NaOH. Which steps should I plan?
That is a weak acid against a strong base, so the equivalence point is slightly basic and phenolphthalein is the right indicator. I would plan it like this:
- Standardize the NaOH against potassium hydrogen phthalate. It takes up water and CO2 from the air, so its nominal concentration drifts.
- Dilute the vinegar 1:10 with deionized water in a volumetric flask, so the titre lands in a readable range.
- Pipette 25.00 mL of the dilution into a conical flask and add 2 to 3 drops of phenolphthalein.
- Rinse the burette with the NaOH, fill it, clear the air from the tip and note the start reading.
- Titrate while swirling until a faint pink lasts for about 30 seconds, then note the end reading.
- Repeat until two titres agree within 0.10 mL and use their mean.
Then c(acid) = c(NaOH) × V(NaOH) ÷ V(sample), multiplied by 10 for the dilution.
NewSolnow
You may have left the NaOH bottle open.
You left the NaOH stock bottle open.
In the recording it stays uncapped after you fill the burette (snippet 2, 00:41). NaOH takes up CO2 and water from the air, so its concentration slowly drifts.
Close it now. If it stood open for long, standardize it again before the next run.